This also works for Unbricking your device.
Requirements:
- A Windows Based PC
- L7 With CM10 on it
- Homero's V10K with CWM,ROOT and Unlocked Bootloader which you can find here : KDZ Custom ROM credits to Homero for making the KDZ.
- KDZ_FLASHER which you can find here.
- LG USB Drivers Installed.
- ADB which you can find here.
- Once You've Downloaded Homero's V10K, Extract the ZIP and you will find a .KDZ file.
- Now Download KDZ_FW_UPDATE.zip and extract it,then open the folder where you extracted it and Start KDZ_FW_UPDATE_EN with Administrator Rights (Right Click on file and select Run As Administrator)
- Once the program started, in Type select 3GQCT and in Phone Mode select EMERGENCY, then in KDZ File select the precedently downloaded Homero's V10K kdz file and press open.
- Make Sure your Phone is connected to the computer in EMERGENCY MODE ( Remove the battery from the phone,then while pressing Vol+ Connect the usb to the computer,a yellow screen must come up showing EMERGENCY)
- Once you've done this, press Launch Software Update and let it work,the procedure takes about 5-10 Minutes,so don't worry.
- At the end of the procedure the phone will reboot and an LG Animated Logo will come up,and after some minutes KDZ_FW_UPDATE Will say you that there has been an error, Don't panic.
- With still the phone connected to the PC,Download ADB zip at the end of the post and extract it in your C:/ Drive, then open up CMD and write:
adb devices [enter] (just to make sure that the computer find your phone)Now your phone will reboot in CWM Recovery, just do Wipe Data/Cache,Wipe Cache,Wipe Dalvik(Which is situated in Advanced Menu). When you have done this,select Reboot System and wait for your phone to finish the boot.
adb reboot recovery [enter]
Thanks To:
- Homero2 for making the V10K KDZ Flashable with ROOT,CWM and Unlocked Bootloader
- Wolf80 xda developer member for write this tutorial.
