Neo / Neo V Fota Unbrick

Here is something to repair your bootloader after a FOTA update and phone In the package you have flash tool and the files you need.

Just unzip to a folder and then use flash tools.
The needed files are in the right folders.

After this you should have your phone fully back for a fresh rom install.

FotaUnBrick - download
Firmware - download

Neo / Neo V Firmware

Neo / MT15
Ics Firmware

ICS 4.1.b.0.431 Global - download
ICS 4.1.b.0.431 Central Europe - download
ICS 4.1.b.0.587 Global - download


Neo V / MT11 Firmware
ICS Firmware
ICS 4.1.b.0.431 Nordic - download
ICS 4.1.b.0.587 Nordic - download


Neo
GB Firmwares
GB 42 Global - download

Enable init.d

How to activated init.d support on LG Optimus L7

Just For ROOTed Devices.
How to root your device go to here

1. Download script from here
2. Put this script to Your sdcard in the phone.
3. Run the script with terminal emulator or Script Manager

su
sh /mnt/sdcard/external_sd/initd.sh

Now, new folder created on system/etc/init.d
and now, you can put your script into this folder like, ram script, sytem tweak etc.

FLASH FIRMWARE VIA KDZ

HOW TO FLASH STOCK FIRMWARE via KDZ

1. Download the latest firmware of your country from -- LG OPTIMUS L7 FIRMWARES
2. Download KDZ Flash Tool (Kdz Update)  -- KDZ update and unzip it
3. Download the latest drivers  -- Driver L7
4. Enable USB Debugging mode go to Settings - Development - USB Debugging Mode
5. Set USB Mode go to Settings - Connectivity - Charge Only
6. Open the folder you unzipped the KDZ and run the file KDZ_FWD_UPD.exe
7. Turn OFF the device and put it in Emergency Mode (Push Volume Up+Power at the same time until the device vibrates and then release them) yellow screen
8. Plug the device in the PC via USB
9. Go to the KDZ screen at your PC and choose Type: 3GQCT and Phone Mode: EMERGENCY
10. At KDZ file above, choose the file .kdz you've downloaded in step 1.
11. Click Launch software update and the flashing begins.

And your already get a new firmware on your LG Optimus L7.